Structure: two coupling sleeves with concave claws and high concentricity. Fit clearance H8 + keyway din6885 + fastening screw din916.
Temperature range: depends on the selected elastic ring. Pay attention to the operating temperature factor at - 20 ° to + 100 ° C!
Torsional rigidity: quincunx elastic rings with different shore hardness are provided for the optimization of transmission system.
Fit clearance: maximum 0.1mm for shaft sleeve connection.
Material Science:
Coupling sleeve: extremely rigid fiber reinforced high performance plastic
Elastic ring: precision molded, extremely wear-resistant plastic
Speed: see table for standard.
Technical parameters: Rated torque: 2 - 810 nm
Product features of TX1 elastic coupling:
Economic application
Good concentricity
Buffer damping
Electrical insulation
Plug in coupling
Due to the keyway connection, the clearance is very small
| SIZE | 2 | 10 | 20 | 60 | 150 | 300 |
| Elastomer insert | A/B/C | A/B/C | A/B/C | A/B/C | A/B/C | A/B/C |
| Rated torque | 2/2.4/0.5 | 12.5/16/4 | 17/21/6 | 60/75/20 | 160/200/42 | 325/405/84 |
| Overall length | 20 | 35 | 66 | 78 | 90 | 114 |
| Inside diameter possible | 5-8 | 6-16 | 10-24 | 16-30 | 19-38 | 20-45 |
| Moment of inertia per Hub | 1.9 | 1.4 | 10 | 30 | 70 | 180 |
