Use the grooved conical clamping collar and fasten the hexagon bolt ISO4017 which is not easy to loosen.
Use a movable spacer sleeve when installing and removing the connecting shaft without moving the installed drive or driven equipment.
The spacer sleeve is placed inside the conical clamping collar.
Temperature range: - 30 to + 120 ° C
Clearance: it is connected by clamps with strong adhesion, and there is absolutely no back clearance.
Service life: operate according to the technical specifications, and the connecting shaft can be durable without maintenance.
Fit clearance: shaft sleeve connection 0.01 - 0.05 mm.
The bellows is made of high elastic stainless steel
Spacer sleeve: steel, optional: CFK construction. Clamping collar: steel
Technical parameters: Rated torque: 1.500 - 4000 Nm, speed depends on A total length, please contact R+W company.
Product features of za2 connecting shaft:
It is not necessary to move the installed drive or driven equipment during installation and removal
The standard length can reach 3M and the CFK sleeve can reach 8m
No intermediate support is required
With dislocation compensation function
Zero backlash, torsional rigidity
The spacer sleeve can be removed radially
|Overall length min. to max.||280-6000||280-6000|